Here's my link:
http://rg258708.moonfruit.com/
Hope you enjoy
ENG 308J Garlock
Silverado Duramax
Thursday, November 17, 2011
Monday, November 7, 2011
Plague of Doves
After reading this book, I feel like it's the type where you have to read it multiple times to catch everything, similar to how many movies are. However, it takes 2 hours to watch a movie, and many hours to read a book, so I think this just adds to the confusion. I appreciate the authors creativity in the presentation of the novel, but, when it comes to books, a logical, easy to follow flow is much more entertaining than a book that is very jumpy. On the plus side, I feel that it was interesting to see various points of view of all the events, similar to how things are in real life. Any story, real or fiction, can be told multiple ways, with many twists. This is how I think the book helps our research a lot. Many people may assume that every person will tell things the same way, but that's never true. To get a comprehensive look at anything, whether it be a subculture, book, story, or whatever, it is essential to get multiple opinions and versions of the story because nobody tells all of it.
Monday, October 31, 2011
Winter Storm
So this past weekend, as I'm sure many of you already know, a rare fall snow storm went through the northeast corridor and dumped many inches (in some cases feet) of snow in the area.
It may sound a bit crazy, but I wish we were hit by it, at least a little bit. Without snow, the cold weather is just miserable and seems almost pointless. Athens and the campus of OU looks great with some snowfall, but it rarely happens. It would have been nice to have seen some of the snowfall here. Coming from northeast ohio, I'm used to seeing major snow falls all the time, and when I go home for winter break, I get used to all the major snow falls and honestly I really miss it when I come back to here after winter break. Hopefully this year will be different and Athens will see at least a few major snow falls while winter quarter is in session ( who knows maybe well get a snow day...doubt it).
It may sound a bit crazy, but I wish we were hit by it, at least a little bit. Without snow, the cold weather is just miserable and seems almost pointless. Athens and the campus of OU looks great with some snowfall, but it rarely happens. It would have been nice to have seen some of the snowfall here. Coming from northeast ohio, I'm used to seeing major snow falls all the time, and when I go home for winter break, I get used to all the major snow falls and honestly I really miss it when I come back to here after winter break. Hopefully this year will be different and Athens will see at least a few major snow falls while winter quarter is in session ( who knows maybe well get a snow day...doubt it).
Tuesday, October 18, 2011
Holy Diver by Dio covered by Killswitch Engage
The song I chose was Holy Diver, performed originally by Dio, and more recently covered by Killswitch Engage. Dio's (an early heavy metal band) version is much slower and, in my opinion, a little more bland. Killswitch Engage's version adds a lot of "pig squeals" and cleaner, more robust sounding guitar to spice the song up. Howard Jones, KSE's vocalist, seems to have a much deeper, more powerful voice than Dio's. Killswitch Engage, who has much influence from earlier metal bands such as Dio, is considered metalcore, a combination of metal and rock.
Sunday, October 2, 2011
Baseball Drama
So, this past Wednesday night, I was sitting down starting my lab report while watching TV. Normally, during the baseball season, I follow baseball quite regularly, since I'm a pretty big tribe fan. But since theyve fallen out of the race (mid August), I havent been watching it much. However, going into that night, there were two teams, the red sox and tampa bay rays in the american league east fighting for the wild card spot. They were tied with only one game left in the season.The actual title of that division was taken by the loaded yankees quite some time ago. Usually, I wouldnt have a preference who would win the wild card, but since 2007, when the red sox knocked the indians out of the playoffs, Ive had quite a bit of spite towards them. Unfortunately, however, when I tuned into the game, they were beating the Orioles 3 to 2 in the 7th during a rain delay while the rays were being womped 7 to 0 by the yankees in the top of the 8th. It wasnt looking all too well for the underdog rays. Out of shear disgust, I flipped the channel to something else. An hour passed by pretty quick, and just out of interest I went to mlb.com just to check the scores. And something AMAZING happened. The rays came back to tie it up 7 to 7. HOLY SHIT! Immediately, I went back to the game they were showing, the O's, red sox game that had started back up and unfortuantely, it was still 3 to 2. At the same time I was watching game day on mlb.com for the tampa bay game. The orioles, also an american east team, played absolutely horribly this season ( they wound up being 69-93 on the season), so as the game went on, I knew in the back of my head that the chances of this team doing anything specatacular against the red sox was dismal. So, that game went into the bottom of the ninth, still 3 to 2. Jonathon Papelbon, the red sox's closer, came on to finish the game out. I really really really dislike this guy. He makes this douche bag stare at the batter before every pitch, like so :

and then he makes this face when he closes the game:

so, as you can see, hes a cocky choch bag. Well, tonight would show him that he isn't the greatest man to walk the earth. Adding to his ego I'm sure, he strikes out the first 2 orioles hitters. At this point, I was just about ready to throw in the towel, but the next batter, Chris Davis, doubled, who then was followed by another double by Nolan Reimold that tied the game up. Maybe, just maybe, the O's could make my day. All the next batter, Robert Andino, would have to do is line it for a base hit......which is exactly what he did. The Red Sox's left fielder, Carl Crawford (who ironically used to play for Tampa), couldn't catch the ball, and Reimold scored, ending the game in a walk off fashion. The look on Papelbon's face was priceless:

My day was complete. Almost. The rays just had to win now. The game had been progressing into extra innings while all this drama was going on in Baltimore. It was the 12th inning with Tampa Bay at bat. My buddy Scott, who was watching the game with me at the time, said, "how wild would it be if they hit a walk off homerun right now?" He called it. Not within 10 minutes of the Orioles beating the Red Sox, Edward Longoria hammered a ball down the left field line to give Tampa Bay the win, walk off style, and the wild card spot. In the words of Tom Hamilton, "How 'bout that?" I dont think I could express how happy I was at this point. Tampa Bay is now who im pulling for this off season, lets hope they do well.

Edward Longoria's long ball to win the game

and then he makes this face when he closes the game:

so, as you can see, hes a cocky choch bag. Well, tonight would show him that he isn't the greatest man to walk the earth. Adding to his ego I'm sure, he strikes out the first 2 orioles hitters. At this point, I was just about ready to throw in the towel, but the next batter, Chris Davis, doubled, who then was followed by another double by Nolan Reimold that tied the game up. Maybe, just maybe, the O's could make my day. All the next batter, Robert Andino, would have to do is line it for a base hit......which is exactly what he did. The Red Sox's left fielder, Carl Crawford (who ironically used to play for Tampa), couldn't catch the ball, and Reimold scored, ending the game in a walk off fashion. The look on Papelbon's face was priceless:

My day was complete. Almost. The rays just had to win now. The game had been progressing into extra innings while all this drama was going on in Baltimore. It was the 12th inning with Tampa Bay at bat. My buddy Scott, who was watching the game with me at the time, said, "how wild would it be if they hit a walk off homerun right now?" He called it. Not within 10 minutes of the Orioles beating the Red Sox, Edward Longoria hammered a ball down the left field line to give Tampa Bay the win, walk off style, and the wild card spot. In the words of Tom Hamilton, "How 'bout that?" I dont think I could express how happy I was at this point. Tampa Bay is now who im pulling for this off season, lets hope they do well.

Edward Longoria's long ball to win the game
Monday, September 26, 2011
ARC
The ARC, or Academic Research Center, is one of the newest editions to the buildings here at OU, and offers quite a bit to the senses. Approaching from the north side, one will encounter semi circular stairs that leads up to the first floor of the futuristic building. Walking into the doors and through a short corridor, the smell of brewing coffee at the ARC cafe fills the air and as you look to your right, your sight matches what your nose is telling you. The ARC lobby is full of comfortable chairs and tables where students are chatting and working on their homework. Talk of foreign concepts fills the air, even for a fellow engineer, as the sound of laptop keyboards clicking muffles the chat. The room is lit by the sun roof- there is no over hanging lights, instead it is filled with a shiny piece of modern art hanging from the ceiling. The stairs are in the lobby and painted steel I beams extrude from the ceiling, creating the sensation of being in quite a futuristic and robust structure. Stained wooden doors of classrooms line the walls. Off in the distance appears to be a garage with the OU Formula 1 racer and a civil engineering students concrete canoe project. This sight tells one that this is most certainly the engineering building. Before you know it, the top of the hour comes along rather quickly, and students scatter from one classroom to another. The ARC is an extravagant place to be, and even if you aren't an engineering student, you should certainly check this modern facility out.
Thursday, September 15, 2011
The Lathe
Being an engineering student myself, I already know of quite a few artifacts that can be found in the depths of Stocker's lower level. Last winter, I had the delightful experience of being able to take a metal machining class, ETM 117. ETM 117 was an excellent class that anyone who believes they will be working in a manufacturing environment should take. Engineers need to be able to use these machines for a few reasons. They need to know the abilities and limitaions of the machines so that when designing a part or process for a part, they can know whether or not it is even possible to manufacture. It is also necessary to know how to use the machine in case the engineer needs to use the machine to make a part on their own. In the class, we used all sorts of machines, but the one that we used the most was the Turnmaster Lathe.
Turnmaster Lathe similar to the one used by ME students
The lathe is a machine used for forming a rod of material into a usuable shape. In our case, we made a screw for the vise we made. Using the lathe, there are many operations that a machinist can do. The first thing we learned was facing off the end of a rod. This is done to create a smooth surface on the end of the rod because when the rod is cut on a bandsaw, the surface finish that is left is very poor. This operation is done with a high speed steel or carbide turning tool. Another operation that can be done is called turning a rod. This is done to decrease the diameter of the rod and is also done using either a high speed steel or carbide turning tool.

Two different types of carbide turning tools
Another primary operation on the lathe is threading. this operation creates the grooves on the rod to allow it to be screwed into a hole of matching size. Threading is also one of the most complicated operations on thelathe because of the timing involved. If one mistake is made, the machinist will have to start completely over.

Threading operation.This operation is actually done with a threading tool (which comes to a very sharp point), not a turning tool.
Drilling can also be done with a lathe to create holes, counter bores, or counter sinks in the end of a rod. This is done using the so called "tail stock" of the lathe.The tail stock is used by putting a drill bit into it, and slowly driving the drill bit into the end of the workpiece as it is rotating. A decent amount of oil is required to lubricate the bit to keep it and the workpiece cool.


Tail stock of a lathe.
These are only a few of many operations that can be done on a lathe. The lathe is an effective machine that has, in part, driven manufacturing. The maunal lathe that was discussed in this post is starting to become more and more rare to CNC turning centers. These machines do all the work for the machinist. That is, all he has to do is locate the part in the machine, push a button, and a program tells the center what tool to use and where. They operate much more quickly and efficiently than manual lathes. In ETM 117, we were also able to use a CNC turning center to create guide pins for the vise. The machine could make the part in less than a minute. The vise screw we made on the manual lathe took 5 weeks to complete.

Mazak turning center
Well thats all I've got on lathes, but if you have any questions I'd be happy to give a shot at answering them.
Subscribe to:
Posts (Atom)